| STANDARDS | |||||
| INDUSTEEL TRADEMARKS | UNS | ASTM | EURONORMS EN | SUS | |
| Incoloy alloy 28 | N08028 | – | 1.4563 X1NiCrMoCu31-27-4 | – | |
| CHEMICAL ANALYSIS (%WEIGHT) | |||||
| C | Cr | Ni | Mo | N | Others |
| < 0,030 | 27 | 31 | 3,5 | – | Cu = 1 |
| PROPERTIES | ||||||||||
| 0,2 Y.S.- Rp 0,2min ASTM / EN | 0,2 Y.S.- Rp 0,2(2)typical value | UTS – Rm min ASTM / EN | UTS – Rm(2)typical value | EI-A(1)% | PREN(4) | HOMOLOGATIONS | ||||
| MPa | Ksi | MPa | Ksi | MPa | Ksi | MPa | Ksi | Last revised | ||
| 220 | 32 | 275 | 40 | 500 | 75 | 620 | 90 | 40 | 39 | |
| APPLICATIONS | |||||||||||
| CHEMICAL INDUSTRIES | PROCESS INDUSTRIES | WATER TREATMENT | STORAGE & TRANSPORTATION | ||||||||
| Nitric Acid | Sulfuric Acid | Polymer& otheracids | Fertilisers | Pulp& Paper | Hydrome-tallurgy | Seawater& desalination | Freshwater &Tanks | Waste Water | Chemical Tanks | Cryogenic Tanks | Renewable |
| POWER GENERATION | OIL & GAS | CONSTRUCTION | ||||||
| Nuclear | Pollution control | Hydroelectric | Renewable | Off & Onshore & production | Refining & Gas processing | Petrochemical | Architecture | Bridges |
For more technical details :
Download the complete datasheet
(1) Indicative typical values
(2) Indicative typical values for thickness 20 mm at RT for transverse direction
(3) Hardening 496°C (925°F), 4h, air cooling
(4) PREN = Cr + 3.3 Mo + 16N
(5) PRENW = Cr + 3.3(Mo + 0.5W) + 16N
(6) HT: mechanical properties depend on heat treatment
